2008年10月28日 星期二

Dissembling Freerunner to connect the debug board

http://wiki.openmoko.org/wiki/Disassembling_Neo1973





remove the sticker



I don't have guitar pick with me, so use a knife instead...



The Freerunner is up-side down actually.

Earpiece is part of the front plastic

I have no guts to remove the PCB as described on the wiki. I'm just trying to connect the debug board afterall.

SMT connector (That's how Andy Green call it) is located at top right, above the LCM





The following cable insertion is not correct!!!
the cable could/should be inserted into SMT connector on the phone until no white line seen.


Insert the cable into the SMT connector on the phone until the white line on the cable cannot be seen


Unlike the situation on the phone, the debug board side white line seems align the white line printed on the board.


But in my case, the left side cable is somewhat prominent than the right side. Well, It works anyway.




http://lists.openmoko.org/pipermail/openmoko-kernel/2008-October/006048.html
http://lists.openmoko.org/pipermail/openmoko-kernel/2008-October/006037.html

2 則留言:

seo 提到...

Is it still function?

mkl 提到...

yes, the serial is workable, but I have not tried the openocd, maybe won't.